EcoSeal

EcoSeal™ LCM is a small, pellet-based wood product specifically designed and engineered for drilling applications. Its purpose is to prevent fluid loss into porous formations in most water, light salt and some oil based drilling applications. The product is readily dispersible into most applications. Once down hole the product expands in formation, reducing the risk of
dislodging due to change in differential pressure making the product dramatically more effective than other low cost LCMs. The densified product withstands substantially higher down-hole pressures significantlybetter than other cellulous materials.

EcoSeal™ effectively controls fluid loss in most mud applications, including most fresh water, light salt and some oil based applications. Designed to replace and will significantly outperform other fibrous material such as rice hulls, sawdust, cottonseed hulls and etc. EcoSeal™ is compatible with a very broad range of other additives in most mud applications. It’s very effective in highly permeable formations. The product has been proven to provide significant bore hole
sweeping properties.

Typical dosage range is between 15 to 40 lb per cubic yard depending on the degree of filtration and control required. EcoSeal™ should be mixed and agitated at a dispersement rate of 12 lb per minute or can be premixed in hopper application for faster, more immediate large volume introduction.